You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Current »

Standard parameters for the request operations

All request operations use the same parameters, only the results are different.

All parameters are optional.

All operations follow the same pattern: GetXXX( UniqueFlightLegId, FlightId, OperatingAirlineIATA, AirportIATA, hoursBefore, hoursAfter, startTime, endTime, onlyUpdatedAfter): YYYY

The semantics of each parameter are described in the table below.


ParameterComments
uniqueFlightLegId : UniqueFlightLegId 

Invalidates all other parameters if used.
Return the corresponding flight leg data. 
If missing, indicates that flight leg data for all UniqueFlightLegIds should be returned.

flightId : FlightId

Ignored if UniqueFlightLegId is used.

Return flight leg data with matching FlightId. 
If missing, indicates that flight leg data for all FlightIds should be returned.

operatingAirlineIATA : OperatingAirlineIATA

Ignored if UniqueFlightLegId is used.

Return flight leg data with matching OperatingAirlineIATA. 
If missing, indicates that flight leg data for all OperatingAirlineIATAs should be returned.

airportIATA : AirportIATA 

Ignored if UniqueFlightLegId is used.

Return flight leg data where

If missing, indicates that flight leg data for all airports supported by the provider should be returned.

NB! Airports the flight leg was diverted from is included in the list of airports that is searched when trying to find relevant flight legs. This applies to flight leg and inbound operations.

hoursBefore : Count

Ignored if UniqueFlightLegId or startTime/endTime is used.

The number of hours before the current time for which data is wanted. What is compared to the current time can vary with implementations. It will typically be:

  • For flight leg oriented operations: 
  • For inbound oriented operations:
  • For outbound oriented operations:

Default: 1 

hoursAfter : Count

The number of hours after the current time for which data is wanted.
See also description above. 

Default: 7

startTime : DateTimeUTC

Ignored if UniqueFlightLegId is used. Invalidates hoursBefore/hoursAfter.

Only flight leg data for flights with SOBT/SIBT or EOBT/EIBT after startTime is returned.  Other times might be used depending on the implementation. See also "hoursBefore".

endTime : DateTimeUTC 

Ignored if UniqueFlightLegId is used. Invalidates hoursBefore/hoursAfter. 

Default: startTime +24h

Error if used without startTime. 

onlyUpdatedAfter : DateTimeUTC

Only flight legs that have been updated after "onlyUpdatedAfter" is returned.
  • No labels