| | Term / Type | Description |
|---|
| flightLegIdentifier : FlightLegIdentifier | See definition under Data entities | | flightIsMultiLeg : boolean [0..1] | Flight leg is part of multileg Flight. If this flight leg is part of a multi-leg flight then the list of airports that is the whole flight is listet in FlightRouteIATA. | | flightRouteIATA : AirportIATA [0..*] | List of airports a multi leg flight will land on before arriving at the destination. The list consists of AirportIATA codes. The list should contain all airports including first departure airport and last destination airport. The list should be ordered by the actual sequence the aircraft uses the airports. | codeshareData : CodeshareData | See definition under Data entities. | | flightServiceTypeIATA : FlightServiceTypeIATA [0..1] | IATA SSIM Appendix C Service Types. | | aircraftIATAType : AircraftIATAType [0..1] | 3 character code as designated by International Air Transport Association (IATA) to uniquely designate Aircraft Type. Local (non-IATA) codes can be added as required as long as they are unique for aircraft types within the defined context.
Reference Document: IATA codeset 7800. | | flightIsCancelled : boolean [0..1] | Set to true if the flight operation is cancelled. For flight as with code share it's possible to only cancel the code shared flight. | | flightDIIndicator: DIIndicator [0..1] | Indicator showing what kind of flight (domestic, international, Schengen) this is. See also: AirportDIIndicator. | | aircraftParkingPosition : AircraftParkingPosition [0..1] | Where the aircraft is located. Code for a parking position, typically a stand, but can also be a hangar. Each airport has a set of AircraftParkingPositions. Each "AircraftParkingPosition" has one given type, defined by "AircraftParkingPositionType". Each position can have one or more usages, defined by (one or more) "AircraftParkingPositionUsage". | | baggageClaimUnit : BaggageClaimUnit [0..1] | Baggage belt (carousel) onto which passenger bags are loaded for collection by passengers on arrival flights.
There are a set of BaggageClaimUnits for each airport. | | beltFirstBag : DateTimeUTC [0..1] | UTC time the first passenger bag was loaded onto a baggage belt (carousel). | | beltLastBag DateTimeUTC [0..1] | UTC time the last passenger bag was loaded onto baggage a belt (carousel) | | sibt : DateTimeUTC [0..1] | Scheduled In-Block Time. The time that an aircraft is scheduled to arrive at its first parking position. Always UTC time. | eldt : DateTimeUTC [0..1] | Estimated Landing Time. The estimated time that an aircraft will touchdown on the runway. (Equivalent to ATC ETA–Estimated Time of Arrival = landing). Always UTC time. | | aldt : DateTimeUTC [0..1] | Actual Landing Time. The time that an aircraft lands on a runway. (Equivalent to ATC ATA –Actual Time of Arrival = landing, ACARS=ON). Always UTC time. | | eibt : DateTimeUTC [0..1] | Estimated In-Block Time. The estimated time that an aircraft will arrive in-blocks. (Equivalent to Airline/Handler ETA –Estimated Time of Arrival). Always UTC time. | aibt : DateTimeUTC [0..1] | Actual In-Block Time. The time that an aircraft arrives in-blocks. (Equivalent to Airline/Handler ATA –Actual Time of Arrival, ACARS = IN). Always UTC time. | | linkedDeparture : FlightLegIdentifier [0..1] | Something that links an departing flight (leg) to an arriving flight leg. Will typically contain some key information. |
|
Elements that might be added
remark_1 (optional) Description: This field holds public remark for arrival/departure.
remark_2 (optional) Description: This field holds staff remark for arrival/departure.
next_info (optional) Description:
This field holds time of new info. Time is reported by MVT NI. UTC time value follows ISO 8601 format used in XML ’dateTime’ type.
last_delay_code (optional) Description: This field holds code for delay
last_delay_code2 (optional) Description: This field holds code2 for delay
| | flightLegIdentifier : FlightLegIdentifier | See definition under Data entities | | flightIsMultiLeg : boolean [0..1] | Flight leg is part of multileg Flight. If this flight leg is part of a multi-leg flight then the list of airports that is the whole flight is listet in FlightRouteIATA. | | flightRouteIATA : AirportIATA [0..*] | List of airports a multi leg flight will land on before arriving at the destination. The list consists of AirportIATA codes. The list should contain all airports including first departure airport and last destination airport. The list should be ordered by the actual sequence the aircraft uses the airports. | | codeshareData : CodeshareData | See definition under Data entities. | | flightServiceTypeIATA : FlightServiceTypeIATA [0..1] | IATA SSIM Appendix C Service Types. | | aircraftIATAType : AircraftIATAType [0..1] | 3 character code as designated by International Air Transport Association (IATA) to uniquely designate Aircraft Type. Local (non-IATA) codes can be added as required as long as they are unique for aircraft types within the defined context.
Reference Document: IATA codeset 7800. | flightIsCancelled : boolean [0..1] | Set to true if the flight operation is cancelled. For flight as with code share it's possible to only cancel the code shared flight. | | flightDIIndicator : DIIndicator [0..1] | Indicator showing what kind of flight (domestic, international, Schengen) this is. See also: AirportDIIndicator. | | checkInZone : CheckInZone [0..1] | Where within the passenger terminal the CheckInDesk is located. Descriptive text string. | | aircraftParkingPosition : AircraftParkingPosition [0..1] | Where the aircraft is located. Code for a parking position, typically a stand, but can also be a hangar. Each airport has a set of AircraftParkingPositions. Each "AircraftParkingPosition" has one given type, defined by "AircraftParkingPositionType". Each position can have one or more usages, defined by (one or more) "AircraftParkingPositionUsage". | | gate : Gate [0..1] | Uniquely defines one gate at the airport. | | gateAction : GateAction [0..1] | The stage in the boarding process for the gate. These can be set manually or by business rules (e.g. auto gating) | | sobt : DateTimeUTC [0..1] | Scheduled Off-Block Time. The time that an aircraft is scheduled to depart from its parking position. Always UTC time. | | tobt : DateTimeUTC [0..1] | Target Off-Block Time. The time that an Aircraft Operator or Ground Handler estimates that an aircraft will be ready, all doors closed, boarding bridge removed, push back vehicle available and ready to start up / push back immediately upon reception of clearance from the TWR. Always UTC time. | | eobt : DateTimeUTC [0..1] | Estimated Off-Block Time. The estimated time at which the aircraft will start movement associated with departure. Always UTC time. | | aobt : DateTimeUTC [0..1] | Actual Off-Block Time. Time the aircraft pushes back / vacates the parking position. (Equivalent to Airline / Handlers ATD – Actual Time of Departure & ACARS=OUT). Always UTC time. | | tsat : DateTimeUTC [0..1] | Target Start Up Approval Time. The time provided by ATC taking into account TOBT, CTOT and/or the traffic situation that an aircraft can expect start up / push back approval Note: The actual start up approval (ASAT) can be given in advance of TSAT. Always UTC time. | | ttot : DateTimeUTC [0..1] | The Target Take Off Time taking into account the TOBT/TSAT plus the EXOT. Each TTOT on one runway is separated from other TTOT or TLDT to represent vortex and/or SID (Standard Instrument Departure (ref. SIDRoute)) separation between aircraft. Always UTC time. | | etot : DateTimeUTC [0..1] | Estimated Take Off Time. The estimated take off time taking into account the EOBT plus EXOT. Always UTC time. | | atot : DateTimeUTC [0..1] | Actual Take Off Time. The time that an aircraft takes off from the runway. (Equivalent to ATC ATD–Actual Time of Departure, ACARS = OFF). Always UTC time. | | fuelRampRequested : Kilo [0..1] | FuelRamp indicates the kilogram of fuel that is requested. Can be negative, for instance if aircraft has to unload fuel before going to a hangar. | | aircraftMTOW : Kilo [0..1] | Maximum take off weight. The maximum weight (in kgs) at which the pilot of this aircraft is allowed to attempt to take off, due to structural or other limits. | | linkedArrival : FlightLegIdentifier [0..1] | Something that links an arriving flight (leg) to a departing flight leg. Will typically contain some key information. |
|
Elements that might be added
checkindesk-data
remark_1 (optional) Description: This field holds public remark for arrival/departure.
remark_2 (optional) Description: This field holds staff remark for arrival/departure.
next_info (optional) Description:
This field holds time of new info. Time is reported by MVT NI. UTC time value follows ISO 8601 format used in XML ’dateTime’ type.
last_delay_code (optional) Description: This field holds code for delay
last_delay_code2 (optional) Description: This field holds code2 for delay
Expanded version of FlightDataInbound
Expanded version of FlightDataOutbound
| | flightId : FlightId | | | airport : AirportIATA [0..n] | Table with AirportIATA codes. '*' as the first airport indicates all supported by the provider.
Default: '*' | airline : AirlineIATA [0..n] | Table with AirlineIATA codes. '*' as the first airline indicates all supported by the provider. Default: '*' | | flightServiceTypeIATA : FlightServiceTypeIATA | | | hoursBefore : Count [0..1] | The number of hours before the current time for which data is wanted. What is compared to the current time can vary with implementations. It will typically be: - SIBT / SOBT when that is the only available information
- EIBT / EOBT when they exist
- AIBT / AOBT when they exist
- Implementations can also use landing/take off times.
Default: 1 | | hoursAfter : Count[0..1] | The number of hours after the current time for which data is wanted.
See also description above. Default: 7 | | startTime : DateTimeUTC | | | endTime : DateTimeUTC | | onlyUpdatedAfter : DateTimeUTC [0..1] | Only data that has been updated after "onlyUpdatedAfter" is returned. |
|
NB! FlightLegData has information about the departure and the arrival of one flight leg.
Expanded version of FlightLegData
This is the standard Airport Data Dictionary FlightLegIdentifier. None of the elements are required, but enough have to be present to actually uniquely identify a flight. |
IFPLID | Defined by Eurocontrol as "A unique flight plan identifier, assigned by the IFPS". Two letters followed by eight digits. | | callsign | A call sign is used to uniquely identify an aircraft using the airspace around a particular airport. Call signs in aviation are derived from several different policies, depending upon the type of flight operation. In most countries, unscheduled general aviation flights identify themselves using the call sign corresponding to the aircraft's registration number. Commercial operators, including scheduled airline, air cargo and air taxi operators, will usually use an ICAO or FAA-registered call sign for their company. These will typically consist of the ICAO code of the operating airline followed by a flight identification. The flight identification is very often the same as the flight number, but could be different due to call sign confusion, if two or more flights close to each other have similar flight numbers (i.e. KLM649 and KLM645 or BAW466 and BAW646). | | aircraftRegistration | An aircraft registration is a unique alphanumeric string that identifies an aircraft. In accordance with the Convention on International Civil Aviation all aircraft must be registered with a national aviation authority and they must carry proof of this registration in the form of a legal document called a Certificate of Registration at all times when in operation.
An aircraft can be re-registered in special cases, for instance if it's sold to an operator in another country. | | ssrCode | Secondary Surveilence Radar CodeA four-digit octal number received from the aircraft transponder when it is interrogated by a secondary surveillance radar (SSR). | | flightId | IATA based identifier for this flight, usually issued long before the flight actually takes place.FlightId is normally the concatenation of OperatingAirlineIATA, FlightNumber and OperationalSuffix. FlightId typically identifies a flight to the majority of systems, but it is not unique across time. It's unique only in conjunction with FlightDepartureDate. Exception: Some airlines use their ICAO code (OperatingAirlineICAO) instead of OperatingAirlineIATA. This might be because they aren't an IATA member or because they just prefer the ICAO code. Regardless, this means that it is allowed to use OperatingAirlineICAO as part of FlightId. FlightId is then defined as the concatenation of AirlineIATAorICAO, FlightNumber and OperationalSuffix. | flightDepartureDate | The scheduled date (based on UTC) of departure of flight. For flights with multiple legs this is the departure of the first leg. This date must not change once set as it is used to make the FlightIds unique. | | departureAirportIATA | Departure airport IATA code (see AirportIATA for description of term). | | arrivalAirportIATA | Arrival airport IATA code (see AirportIATA for description of term). | | departureAirportICAO | Departure airport ICAO code (see AirportICAO for description of term). | | arrivalAirportICAO | Arrival airport ICAO code (see AirportICAO for description of term). |
|
NB! TurnaroundData has information about the arrival and departure of one aircraft.
Expanded version of TurnaroundData
